Having trouble with your Xbox but don’t want to send it into Microsoft for repairs? Does your Xbox keep freezing during games or are you receiving the filthy disc mistake screen on your television? If this is so, the difficulty you are experiencing has to do with your DVD drive. Here’s a couple tips.

Never blow canned air into the drive without opening it. If you read someplace else this is the solution, it’s not and it’ll essentially complicate matters even worse. All you’ll be doing is assuring the dust will be redistributed uniformly within the drive.

2 Tips To Fix A Xbox 360:

Tip 1. Is to employ a standard CD / DVD cleaner. You can purchase this at many retail shops that sell Xbox 360 or at any Playstation game store. The benefit to this is that it is only going to scrub the lens.

Tip 2. The way to fix a Xbox 360 is to use the info given to you to work out what drive you are working with. You must figure out the maker of your Xbox DVD drive and complete the tear down tutorials.

This is where it is beneficial to have read and finished the tear down tutorials. Next, you’re going to adjust the potentiometer on the laser. Even though it may appear a bit extraordinary, it is essentially a reasonably straightforward process if you follow the steps closely. It’s a straightforward process that may be done reasonably quickly.

So by following these 2 easy tips, you will be well on your way to fixing your Xbox.

One of the most confusing errors in Xbox 360 gaming experience is E71. It is positively not caused by graphics card errors as in E74 error or “red ring of death” problems. Therefore it is much harder to explain and understand.

While most Xbox 360 problems are caused by either overheating within the motherboard and the case, or graphics card, video scaler chip or hard disc drive problems, E71 error is quite different. And the most frustrating part about it, no one ever finds the actual cause nor the solution to it.

However, most people believe that E71 error is caused by the dashboard and console software updates. Many gamers reporting on this one claimed that they got the error code right after they had updated the dashboard or console software. A most enlightening evidence about this possibility was recorded during the Fall 2006 update; many Xbox 360 gamers experienced the same problem at the relatively same time.

The second potential cause of E71 error is the firmware flash or hack. This action is commonly known as one trick that allows you to play game without having the original game disc in the console. It is usually called “playing with a back up disc”. However, this may actually cause E71 error.

Of course, there are many other possibilities-which, unfortunately, we haven’t discovered yet. And more unfortunately, Microsoft hasn’t confirmed anything about it either.

Try these steps if you want to try repairing it yourself:

1. Reset your Xbox 360 completely. Enter the dashboard, scroll to the farthest right column. Then press the “Initial Setup” and follow the later on-screen instructions.

2. Cannot access the screen? Restart your Xbox 360 while pressing and holding down the “Y” button. It may sometimes restore all settings back to the factory default.

Sadly to say, these two steps are not 100% guaranteed. Some gamers complained that they still experienced the same problem after taking them.

If you are one of them, try to learn more through the Xbox 360 repair guide available online. Or, as the last-but-really-not-recommended resort, send back your console to Microsoft. It is going to cost you $200, and they are going to need more than 8 weeks to fix it.

E71 is a quite common error gamers may experience with Xbox 360. And often, this problem may be accompanied with a ring of red lights on the front of the console.

What makes it differ from the more common “red ring of death” and E74 error is that this one is not caused by overheating. In fact, no one is 100 percent sure what may cause it.

The biggest suspicion lay on the dashboard and console updates problems, such as the fall update of 2006. Also, problems have been reported by some gamers incorrectly flashing their hardware or doing botched firmware hacks. These actions cause the system function improperly.

Now, answer this question: Have you ever updated your Xbox 360 recently? Have you attempted to hack or flash the firmware? If yes, there you go! It may be the cause of your Xbox 360 E71 error. If not, the possibilities are too random to be sure of.

Here are several steps you can take yourself should E71 error occurs:

1. Reset your Xbox 360. To do this, enter the dashboard, go to the right-most column, press the “Initial Setup”, then follow the on-screen instructions.

2. If you cannot view the screen properly, hold the “Y” button on your controller as you switch the console on. This may restore the default settings.

Check out some fix it guides on the net… Several are listed here on our home page.

E68. System Error. Contact Xbox Customer Support. If you see that message above on a black screen, along with the lower-right quadrant of the “Ring of Light” on the front of your console flashing red, it means you are facing the Xbox 360 E68.

E68, also known as Error 68, is quite common. Some gamers sometimes find it occur upon booting up, with about 4 different languages popped up. It means that Xbox 360 has insufficient power to function properly. It may happen due to a hardware failure within the Xbox hard drive, or you have unnecessary accessories attached to the console.

To repair this error, take these steps:

1. Switch off your Xbox 360.

2. Switch it back on. If the code doesn’t recur, it may just be a random hardware fluke and you have nothing to worry about. Otherwise, do the next steps.

3. Switch off your Xbox 360 one more time.

4. Detach any unnecessary accessories.

5. Detach the hard disk drive. To do this, press the latch on the front of the hard drive caddy and lift it from the top of the console.

6. Reinstall the hard drive.

7. Switch on your Xbox 360.

8. If you deal with the same problem all over again, get the automatic latest update from Xbox Live. To do this, switch off the console, detach the hard disk drive, and then-using an Ethernet cable-connect the console to the Internet. Other simple trick is by running a recent game (2007 or newer). It will immediately install the automatic update.

If you are still experiencing the same problem after trying to take all above steps, you have two options. First, send your Xbox 360 back to Microsoft. They will repair it in no less than 8 weeks for up to $200. Or, second, purchase a new hard disk drive. However, this can be quite expensive and you may lose your saved game files.

For some people, their video games are a major part of their life. If the E74 error happens to you, then you will need to find out how to fix it quickly so that you do not lose a lot of playing time on your Xbox 360. Sometimes people may think that the only way to fix this horrible problem in the gaming system is by sending the product off for months at a time.

This is not the case.

You can easily fix it at home quickly.

Take the time to read this to find out more on how to fix it at home…

Tip 1

Sometimes, the problem does not even lie within the system. Sometimes this error can be caused by a defective AV cable. Take the time to disconnect it and clean it really well to make sure that there is no dust that may be affecting the game. Reconnect it and see if it works from there.

Tip 2

If it does not, then you may want to try a new AV cable. To save yourself the cost of a new cable, try borrowing one to see if that will fix the problem. If that is not the problem, then you should go onto to the next step in order to fix it.

Tip 3

The next step is a bit more complex, but it can be done at home if you take the time out to try it. There are many different ways to fix the error, but there is no one right way. You will just have to use trial and error in order to get it done. There are a lot of different guides that are available both online and in gaming stores that can help you to walk through various different steps that will fix your Xbox 360 and have you playing again in no time. If you get the right guide, you may even find video or picture tutorials that can help you walk you through each process in a step by step way that will make it that much easier for you.

When you look for some of the best options out there for fixing your Xbox 360, make sure that you find a method that is going to work for you.

Take the time to read product reviews in order to make sure that you are getting a guide that is actually going to have your Xbox 360 up and running again.

Do not even consider sending it off because you will not be able to play it for quite some time. Do not fret- learn how to fix the Xbox 360 E74 error ASAP!